Mastic "Brit" Roofing-R
Professional one-component material of cold application for installation and repair of mastic roofs
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Bridges, tunnels and subways
Application: Seaports and railways
Application: Factories and buildings
Category: Insulating and roofing mastics
It is intended for the device of rolled roofs, as well as for the device and repair of mastic layers of waterproofing of building structures, buildings and structures.
- High adhesion strength to the base.
- Resistance to UV rays.
- Fire and toxic safety.
- Can be applied to vertical surfaces.
- High elasticity of the formed coating.
Oil bitumen, organic solvent and polymer composition (STO 77310225.011-2017).
Heat resistance for 5 hours, ºС, not lower: -
Softening point, °С, not lower: 110
Adhesion strength to the base - to concrete, MPa, not less: 0.6
Adhesion strength to the base - to metal, MPa, not less : 0.9
Water absorption within 24 hours, % by mass, not more than: 0.4
Softening point, °С, not lower: 110
Adhesion strength to the base - to concrete, MPa, not less: 0.6
Adhesion strength to the base - to metal, MPa, not less : 0.9
Water absorption within 24 hours, % by mass, not more than: 0.4
- Clean the surface from dust, dirt, grease and prime. It is recommended to use the bituminous primer "Brit" B. In the case of using the mastic "Brit" Roofing-R, it is necessary to use the primer "Brit" R.
- Thoroughly mix Brit Roofing-B mastic or Brit Roofing-R mastic and apply to the primed surface with a brush or roller.
- Allow to dry for 5-10 hours before carrying out further work.
- Reapply the mask if necessary.
Metal bucket 20/10/5kg.
See also