Tape "Brit" Shchma 50x7
Professional material for the device of longitudinal and transverse technological joints of asphalt concrete pavements of roads, interface joints, waterproofing of joints of prefabricated reinforced concrete structures
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Roads
Application: Factories and buildings
Category: Bitumen-polymer joint tapes
Sealing of technological joints of road surfaces made of hot asphalt concrete mixes (tape "Brit" A) and from crushed stone-mastic asphalt mixes (tape "Brit" ShchMA), junctions to road surfaces, sidewalks, buildings and structures, curbstones, drainage trays, foundations , rails, hatches of manholes and arrangement of joints of foundation blocks and panels. The sealing effect is achieved as a result of the melting of the tape material under the influence of the high temperature of the mixture and the formation of a protective layer during compaction, as a result of which the water saturation of asphalt concrete in the seam zone is reduced and the formation of technological cracks in the coating is prevented.
- Reduction of water saturation parameters in the cold joint zone by an average of 45%.
- Excellent resistance of interface seams to long freeze-thaw cycles.
- Reliable sealing of joints - the strength of joints using Brit tape is twice as high as adhesions made using traditional technology.
- There is an option with an additional adhesive layer.
- Simple unified application technology.
Softening point according to KiSh, °С, not lower than: 90
Fraas brittleness temperature, °С, not higher: -35
Needle penetration depth at +25 °С, 0.1 mm, not more than: 80
Water absorption, %, not more than : 0.2
Fraas brittleness temperature, °С, not higher: -35
Needle penetration depth at +25 °С, 0.1 mm, not more than: 80
Water absorption, %, not more than : 0.2
Oil bitumen, plasticizers and modifying polymers (STO 77310225.001-2009).
- Remove original packaging.
- Unwind the tape roll along the work surface.
- Press firmly with the inner side to the surface, fix with pressure and remove the protective release film.
- Perform standard operations for laying and compacting the asphalt mix.
- The description of the work production technology is presented in detail in STO 77310225.001.1-2015 “Bitumen-polymer docking tape “Brit”. Application Rules".
Cardboard drums:
47.5 linear meters m (tape "Brit" Shchma size 50 × 7 mm).
47.5 linear meters m (tape "Brit" Shchma size 50 × 7 mm).
See also