Roll material "Brit" Business EKP
A black canvas made by sequentially applying a binder and a protective layer to the base on both sides.
Base: polyester, fiberglass or fiberglass (depending on the brand).
Covering layer: bitumen-polymer materials.
Protective layer: bottom side - film; the front side is a film or coarse-grained dressing.
The following brands are produced in the Brit Business line: Business EPP, Business EKP, Business HPP, Business HKP, Business CCI, Business TCH.
Explanation of brand designations: "E" - the basis of polyester; "X" - fiberglass base; "T" - fiberglass base; "P" - a protective layer of a polymer film; "K" - a protective layer of coarse-grained dressing.
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Base: polyester, fiberglass or fiberglass (depending on the brand).
Covering layer: bitumen-polymer materials.
Protective layer: bottom side - film; the front side is a film or coarse-grained dressing.
The following brands are produced in the Brit Business line: Business EPP, Business EKP, Business HPP, Business HKP, Business CCI, Business TCH.
Explanation of brand designations: "E" - the basis of polyester; "X" - fiberglass base; "T" - fiberglass base; "P" - a protective layer of a polymer film; "K" - a protective layer of coarse-grained dressing.
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Factories and buildings
Category: Roll roofing and waterproofing materials
The material is used for installation or repair of waterproofing roofing and waterproofing of building structures by fusing.
Rolled materials "Brit" from the technological leader in the bitumen market "Gazpromneft - Bituminous Materials" are developed and produced using modern technologies from our own raw materials.
The benefits of Brit roll roofing materials include:
The benefits of Brit roll roofing materials include:
- loss of dressing less than 15%;
- the mass of the binder on the welded side is not less than 2 kg per 1 m²;
- possibility of application in all climatic zones;
- the possibility of using several layers of waterproofing thanks to the technology of laying rolls.
Length, m: 10.00 ± 0.50
Width, mm: 1000 ± 20
Thickness, mm: 3.8 ± 0.2
Weight of material per unit area, kg/m²: 5.00 ± 0.25
Flexibility at low temperatures for the lower side of the web, °С, not higher: -20
Heat resistance, °С, not less than: 100
Maximum tensile force in the longitudinal / transverse direction, N, ±200: 700/500
Width, mm: 1000 ± 20
Thickness, mm: 3.8 ± 0.2
Weight of material per unit area, kg/m²: 5.00 ± 0.25
Flexibility at low temperatures for the lower side of the web, °С, not higher: -20
Heat resistance, °С, not less than: 100
Maximum tensile force in the longitudinal / transverse direction, N, ±200: 700/500
Rolls wrapped in two places with a polymeric packing tape with an adhesive layer.
The rolls are placed on pallets and packed in a shrink film cap.
Approximate number of rolls on a pallet:
Roll material "Brit" Business EKP - 23 pcs.
The rolls are placed on pallets and packed in a shrink film cap.
Approximate number of rolls on a pallet:
Roll material "Brit" Business EKP - 23 pcs.
The material must be transported in covered vehicles. Eliminate the possibility of free movement and mechanical damage to pallets with rolled material. Store packaged sorted by brands, protected from moisture and direct sunlight. Air temperature during storage: not lower than minus 20 °C and not higher than 40 °C.
See also