Roll material "Brit" Standard EPP
A black canvas made by sequentially applying a binder and a protective layer to the base on both sides.
Base: polyester, fiberglass or fiberglass (depending on the brand).
Covering layer: bitumen-polymer materials.
Protective layer: bottom side - film; the front side is a film or coarse-grained dressing.
In the "Brit" Standard line, brands are produced: Standard EPP, Standard EKP
Decoding of brand designations: "E" - polyester base; "K" - a protective layer of coarse-grained dressing; "P" - a protective layer of a polymer film.
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Base: polyester, fiberglass or fiberglass (depending on the brand).
Covering layer: bitumen-polymer materials.
Protective layer: bottom side - film; the front side is a film or coarse-grained dressing.
In the "Brit" Standard line, brands are produced: Standard EPP, Standard EKP
Decoding of brand designations: "E" - polyester base; "K" - a protective layer of coarse-grained dressing; "P" - a protective layer of a polymer film.
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Factories and buildings
Category: Roll roofing and waterproofing materials
The material is used for the installation or repair of a multi-layer roofing carpet.
Roll materials "Brit" from the technological leader in the bitumen market "Gazpromneft - Bitumen Materials". In the production of rolled materials, we use our own bitumen, which undergoes quality control throughout the entire production chain: from oil to bituminous roofing mixture, which guarantees the high quality of the finished product.
The advantages of Brit roll materials include:
The advantages of Brit roll materials include:
- low loss of powder;
- possibility of application in all climatic zones;
- high breaking characteristics;
- increased plasticity of the binder facilitates laying.
Length, m: 15.00 ± 0.10
Width, mm: 1000 ± 0.20 Weight of
material per unit area, kg/m²: 3.00 ± 0.15 transverse direction, N, ±200: 550 ±200/350 ±150
Width, mm: 1000 ± 0.20 Weight of
material per unit area, kg/m²: 3.00 ± 0.15 transverse direction, N, ±200: 550 ±200/350 ±150
Rolls wrapped in two places with a polymeric packing tape with an adhesive layer. The rolls are placed on pallets and packed in a shrink film cap.
Approximate number of rolls on a pallet:
Roll material "Brit" Standard EPP - 23 pcs.
Rolled material "Brit" Standard EKP gray slate - 25 pcs.
Approximate number of rolls on a pallet:
Roll material "Brit" Standard EPP - 23 pcs.
Rolled material "Brit" Standard EKP gray slate - 25 pcs.
The material must be transported in covered vehicles. Eliminate the possibility of free movement and mechanical damage to pallets with rolled material. Store packaged sorted by brands, protected from moisture and direct sunlight. Air temperature during storage: not lower than minus 20 °C and not higher than 40 °C.
See also