Cord "Brit" Ø20 mm
Professional heat-resistant material designed to form a chamber of expansion and technological joints in cement concrete and asphalt concrete pavements of airfields and highways when sealing with mastics and sealants of hot and cold application
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Airfields
Application: Factories and buildings
Category: Sealing heat-resistant cords
Compaction and formation of a chamber of expansion joints in cement-concrete pavements of roads, airfields, storage and technological areas when they are sealed with hot and cold mastics.
- Simple unified application technology.
- The material is not chemically active and is not affected by solvents: gasoline, aviation kerosene, machine oils, anti-icing agents, etc.
Foamed polyethylene (STO 77310225.002-2012).
Apparent density, g/cm3: 0.02–0.03
Tensile strength, kgf/cm2, min: 1.5
Elongation at break, %, min: 25
Heat resistance at 200 °C, °C, min less than: 200
Water absorption, % by volume, not more than: 0.2
Tensile strength, kgf/cm2, min: 1.5
Elongation at break, %, min: 25
Heat resistance at 200 °C, °C, min less than: 200
Water absorption, % by volume, not more than: 0.2
- Cutting cracks / seams / joints under the sealing chamber using a cutting machine.
- Blowing out the chamber with hot compressed air.
- Laying the Brit sealing cord to the design depth.
- Treatment of the walls of the cut chamber with mastic or primer.
- Filling the chamber with mastic or sealant of hot or cold application.
- Surface treatment with finely dispersed mineral material (if necessary).
- The description of the work production technology is presented in detail in STO 77310225.002.1-2015 “Heat-resistant sealing cord “Brit”. Application Rules".
Standard sizes of a sealing cord Ø from 10 mm to 38 mm. Packing: a bay from 130 linear meters. m up to 1 700 linear meters m in cardboard boxes
See also