Primer "Brit" Standard-R

Professional one-component cold applied material for surface preparation before laying roofing and waterproofing materials.

Any questions? Please ask our manager by phone: +7 (495) 145-93-26

Application: Seaports and railways

Application: Bridges, tunnels and subways

Application: Factories and buildings

Category: Insulating and roofing mastics

Application
Advantages
Specifications
Technology
Composition
Package
Documentation

Application

An effective material designed to ensure adhesion of materials to various surfaces when installing waterproofing coatings of roll materials, anti-corrosion coatings, and bituminous mastics.

Advantages

  • Suitable for most surfaces: brick, concrete, wood, slate, metal, stone;
  • Has a wide temperature range of application;
  • High adhesion to most materials;
  • Strong bond strength to the base;

Specifications

Mass fraction of non-volatile substances, %, 60.0-85.0
Conditional viscosity, s, 15-40
Bond strength to the base, MPa, with concrete not less than 0.1
Bond strength to the base, MPa, with metal not less than 0.1
Softening temperature, °C, not less than 90
Drying time, hours, not more than 6

Technology

  • Prepare the surface: clean it from dirt and moisture.
  • Thoroughly mix the primer until it is homogeneous and apply it evenly to the surface.
  • Wait for complete drying (under standard conditions - not less than 6 hours) before proceeding with the next steps. Apply an additional layer if necessary.
  • After completing the work, clean the tools with a solvent.
  • The hardened primer can be removed mechanically.

Composition

Petroleum bitumen, organic solvents (STO 77310225.027-2021)

Package

Metal buckets with a net weight of 4.5/9/18 kg.

Documentation

Technical instruction sheet Primer "Brit" Standard-R
Fire safety compliance declaration
See also