Composition "Brit" ZVS-V
Professional protective and restorative composition (ZVS) of cold application of film-forming action to eliminate surface defects, restore operational properties and long-term protection of asphalt concrete and cement concrete pavements
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Airfields
Application: Factories and buildings
Application: Roads
Application: Seaports and railways
Category: Protective compounds
An effective method to prevent the progressive destruction of asphalt concrete is the elimination of surface defects, restoration of performance properties and long-term protection of asphalt concrete pavements of roads and airfields from the effects of weather and climatic factors, anti-icing agents.
- Efficient restoration of the surface structure and reliable protection of the asphalt concrete pavement.
- Long-term hydrophobization of the coating.
- Slowing down the aging of the binder.
- Simple unified application technology.
Dispersion of mineral filler and inorganic compounds in a solution of bitumen-polymer binder in water (ZVS-V) or organic solvent (ZVS-R) (STO 77310225.006–2020).
Mass fraction of non-volatile substances, %, not less than: -
Residue content after evaporation, %: from 50 to 70
Density, g/cm3, not more than: 1.75
Adhesion with crushed stone surface, score, not less than: 4
Drying time, °С , h, not more than: 3
Residue content after evaporation, %: from 50 to 70
Density, g/cm3, not more than: 1.75
Adhesion with crushed stone surface, score, not less than: 4
Drying time, °С , h, not more than: 3
- Clean the surface from dust and dirt.
- Thoroughly mix the composition to a homogeneous state and apply manually using rubberized sliders, rollers or brushes, or using a specialized mechanized installation.
- Application of ZVS-R at a temperature not lower than +5 ºС. Application of ZVS-V at a temperature not lower than + 10 ºС.
- The drying time of the treated coating depends on climatic factors, the condition of the substrate and the thickness of the applied layer and ranges from 2 to 12 hours.
- The description of the work production technology is presented in detail in STO 77310225.006.1-2020 “Brit protective and restoring compositions. Application Rules".
Plastic bucket 40 kg.
See also