Mastic "Brit" Isolation-R
Professional one-component cold application material for indoor and outdoor waterproofing
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Any questions? Please ask our manager by phone: +7 (495) 145-93-26
Application: Bridges, tunnels and subways
Application: Seaports and railways
Application: Factories and buildings
Category: Insulating and roofing mastics
Waterproofing of surfaces of building structures, buried structures (foundations, basements, piles, tanks, etc.), elements of bridge structures and hydraulic structures, pipelines, interiors of buildings and structures; anti-corrosion treatment of metal structures.
- High adhesion strength to the base.
- Fire safety ("Brit" Insulation-B).
- Can be applied to vertical surfaces.
- High elasticity of the formed coating.
- Possibility of application at negative temperatures (mastic "Brit" Isolation-R is used at temperatures down to -20 ºС).
Oil bitumen, organic solvent and polymer composition (STO 77310225.011-2017).
Heat resistance for 5 hours, ºС, not less: -
Softening point, °С, not less 80
Adhesion strength to the base - concrete, MPa, not less: 0,1
Adhesion strength to the base - metal, MPa, not less than: 0,1
Softening point, °С, not less 80
Adhesion strength to the base - concrete, MPa, not less: 0,1
Adhesion strength to the base - metal, MPa, not less than: 0,1
- Clean the surface from dust, dirt, grease and prime (it is recommended to use a bituminous primer "Brit").
- Mix the mastic thoroughly and apply to the primed surface with a brush or roller.
- Allow to dry for 5-10 hours before carrying out further work.
- Reapply the mask if necessary.
Metal bucket 20/10/5 kg
See also